0

Display settings / manual

Aug 12, 2020 - 11:36 AM

Viewed 503 times

  • Hi,

    Does anyone know where I can find a manual to explain the different configuration options of the display such as KM to MPH etc. I know how to set P10 etc but that’s are far as the manual goes.

    Thanks

    0
  • So when you set the display to Mph does the speed limit setting also switch to Mph?

    0
  • Can’t find anywhere the wheels size, is the default parameter ok ?

    0
  • Cecile, P08 is the setting for wheel diameter (in inches).
    I would suggest checking.
    My display unit came with setting for full size AMX even I am having a Mini Capital.
    It messes up the bike enough not to have a reasonable ride / range.
    And I am still waiting for an answer from support after receiving my bike end of July.

    0
  • I've got the AMX LE and I just checked the wheel diameter-setting, it said 27,4. Is that correct?

    0
  • Alex K:
    I've got the AMX LE and I just checked the wheel diameter-setting, it said 27,4. Is that correct?

    I noticed that too,
    I changed it to 28, but I don't know if it's correct

    This post was edited Sep 4, 2020 11:23AM
    0
  • Thanks @soki for linking the manual

    Alex K:
    I've got the AMX LE and I just checked the wheel diameter-setting, it said 27,4. Is that correct?

    Andrea:
    I noticed that too,
    I changed it to 28, but I don't know if it's correct

    I can confirm that 27,4 is correct for AMX STEP and AMX CLASSIC

    In addition to the speed limit tutorial, we also have a guide for setting the units between kmph and mph: https://analogmotion.helpdocs.io/article/p4rd29xwpu-how-to-change-units-mph-kmph-on-the-amx-display

    1