1

Rear Light Cable tidy

Aug 11, 2020 - 10:34 AM

Viewed 495 times

  • I've flipped the rear light on my AMX so the cables now point upwards. Highly recommend this as it looks way neater.

    Its a 2 minute job using the tools in the box.

    2
  • I would have concerns regarding water ingress into the light with the contacts upside down. Standing water in there might cause short circuits. I‘ve attached a picture how I solved the issue. Just bend the contacts carefully around the light housing.

    267DE4F6-A00C-4A2C-8355-784EEA35B54D.jpg

    This post was edited Aug 12, 2020 03:37PM
    1
  • Hi, i see you replaced the saddle and seatpost. What saddle and seatpost did you use? (Because you neet to be able to fit the wire throug)

    0
  • Hi, seat post is the same, not changed. Saddle is from Velo, bought it on Amazon.

    1
  • Like that flip and have done it myself now. Looks great!

    0
  • Inspired! Doing this immediately :D

    0